dmukgr
Junior Member
Posts: 1,517
|
Post by dmukgr on May 8, 2023 17:37:54 GMT
I’ll open it up next weekend when back home.
It used to work okay for a few years so maybe something got loose.
|
|
|
|
Post by mothercruncher on May 8, 2023 17:43:21 GMT
|
|
|
|
Post by elstoof on May 8, 2023 17:53:12 GMT
Nice, I’ve got a catalinbread silicon based percolator clone, their Karma Suture. It’s nice, slightly different take on it without any germanium. My White Atom gives me some nasty Ge goodness.
Just lacquered the analog delay pedal case, got the board all wired up so as soon as the epoxy is set I can finish that off
|
|
|
|
Post by mothercruncher on May 8, 2023 18:39:40 GMT
I’ve not heard of a White Atom, I’m scared to look or it’ll be on THE LIST as well. I could sit and build pedals I want to check out for the rest of the year and get sod all else done  The HP is bizarre and needs some really odd component values, and the NPN transistor appears to bias the PNP one, they’re linked in an odd way that’s pretty unique, cool circuit. I always want to rush assembly and waiting for the lacquer to harden is tortuous, but needed as the hardware is going to be clamped on it. Usually move on to something else and then come back in a few days when it has cured. |
|
|
|
Post by elstoof on May 8, 2023 18:50:12 GMT
|
|
|
|
Post by mothercruncher on May 9, 2023 18:21:47 GMT
FFS, need to make another one now 🥸
|
|
dmukgr
Junior Member
Posts: 1,517
|
Post by dmukgr on May 31, 2023 18:29:38 GMT
I’ll open it up next weekend when back home. It used to work okay for a few years so maybe something got loose. Been away longer than I expected to be but back last night, opened it up and whilst I can hear noise coming through the amp if I wiggle a wire or two there is nothing obviously disconnected. I’m assuming it’s the volume know or something that’s fecked. |
|
dmukgr
Junior Member
Posts: 1,517
|
Post by dmukgr on May 31, 2023 18:30:33 GMT
Anyone know anyone Manchester way that’s handy at fixing these things?
|
|
|
|
Post by elstoof on May 31, 2023 18:39:46 GMT
|
|
|
|
Post by mothercruncher on May 31, 2023 22:13:51 GMT
Spend some time rotating the dials and flicking the pickup switch back and forth, spray switch cleaner/isopropyl alcohol around. If stuff’s sat for years the tarnishing can be enough to shag the signal.
|
|
Lizard
Junior Member
I love ploughmans
Posts: 4,484
|
Post by Lizard on May 31, 2023 22:15:59 GMT
Did he use to work at (or out of) Johnny Roadhouse? |
|
|
|
Post by elstoof on May 31, 2023 22:52:24 GMT
No idea
|
|
dogbot
Full Member
Posts: 8,738
|
Post by dogbot on Jun 1, 2023 16:36:00 GMT
Spend some time rotating the dials and flicking the pickup switch back and forth, spray switch cleaner/isopropyl alcohol around. If stuff’s sat for years the tarnishing can be enough to shag the signal. Can confirm, per elsewhere on this thread, this fixed a guitar that's basically been just hung on the wall for about 25 years. Still no one wants to buy it, though  |
|
|
|
Post by clemfandango on Jun 1, 2023 16:38:30 GMT
I've used Steve Robinson loads of times, he's great.
|
|
|
|
Post by RadicalRex on Jul 27, 2023 10:18:15 GMT
Have started to play again after many years and decided to get me a new guitar:  It's a good old Epiphone SG Standard, to my own surprise actually. I knew it'd most likely be an SG because after everything I've tried over two decades, I've always been drawn back to the SG because of its great comfort, playability, looks, sound, feel. I was actually most interested in the SG Modern Trans Black Fade (the one they had in the shop looked amazing, much better than in these pictures imo), but its asymmetrical neck was far too chunky on the thumb side for my liking. The SG Prophecy also has the asymmetrical neck, but even though it felt a wee bit thinner than the Modern's, I still found it too fat and just couldn't get on with it. The SG Standard's good old Slim Taper neck on the other hand... just beautiful, exactly how I like it. I prefer it even to Jackson and Charvel necks. I was pretty surprised by the quality of the pickups. I bought a few Epiphones 15-25 years ago, and back then their pickups were just horrible muffled rubbish. These however sound really nice, pretty close to the Gibson original in my opinion. They're not good for thrash and black metal so they will have to make way for Duncans anyway, but for clean, blues, hard rock and whatever else this guitar's "intended" use is, I think it's really great out of the box. It was fresh out of the box, and an experienced guy in the shop spent a good amount of time to set it up thoroughly, and as far as I can tell he did a superb job. Plays like a dream and is perfectly intoned. Nice! The only niggle I have is that the frets are pretty rough, on bends you can feel the strings scratching over them, although after a bit of play it's got a little better already. I'm going to polish them when I change strings, that should fix it. One question people always ask about SG's is: but what about the neck dive? None. You can feel it's on the neck-heavy side, but it perfectly stays in place on a strap. One thing to consider here is that not all SG's are the same and the strap pin is in different places depending on model. The more oldschool models like the SG Standard 60s or the SG Custom with the small pickguard usually have a lower neck joint and hence a lower strap pin, which I imagine may cause problem for weight distribution. But the SG Standard with the large pickguard has an extended neck joint that allows better pin placement and there's no problem here. Compare these pics of the SG Standard and the SG Standard 60s to see what I mean. So yeah, I'm really happy I must say. I love this guitar! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 27, 2023 10:44:12 GMT
Epi Probuckers if that is what it has are a very nice pickup, I think they are basically Eastern built Classic 57s or Burstbuckers.
The scratchy frets on Epiphone is definitely a thing, you can get the worst of it out with those micro mesh things if they are otherwise well shaped etc.
HNGD
|
|
|
|
Post by RadicalRex on Jul 27, 2023 11:13:43 GMT
They're Alnico Classic Pros, which are modelled after 57s if the internet can be trusted. Thanks for the tip with the mesh, yeah that's what I was going to do, I already ordered a set of these if that's what you mean. |
|
|
|
Post by elstoof on Jul 27, 2023 11:46:51 GMT
Great stuff, enjoy the new guitar bliss. Never really played an SG myself but love the look of them
|
|
EMarkM
Junior Member
Well, quite...
Posts: 2,150 
|
Post by EMarkM on Jul 27, 2023 12:19:09 GMT
Many congratulations!
I love my SG; it’s the 1960s Tribute one with the P90s.
Have a HUGE amount of fun with yours. That’s what SGs are for.
I reckon “SG” stands for “Silly Grin”!
|
|
dogbot
Full Member
Posts: 8,738
|
Post by dogbot on Jul 27, 2023 12:20:30 GMT
Nice; they're a solid guitar.
(sorry.)
|
|
|
|
Post by quadfather on Jul 27, 2023 12:31:22 GMT
Super groovy
(Not sorry)
|
|
|
|
Post by mothercruncher on Jul 27, 2023 17:19:05 GMT
I’ve a ‘74 Ibanez lawsuit SG I found in a guitar shop. Had been gigged to death, worn out, mildly scalloped from string bending and filthy. Couldn’t work out why it was so discoloured until I tried white spirit and brown tobacco juice came off it in spades 🤮. I love it because it’s the same age as me, but I need to run the fairly mellow pickups quite high and they get in the way of the playability a bit. Need to buy three good humbuckers for it, but I think I’ll actually sell it. I play it the least… yet every time I pick it up I do love it…
|
|
|
|
Post by quadfather on Jul 27, 2023 17:20:24 GMT
Don't.
Sell.
It.
|
|
|
|
Post by mothercruncher on Jul 27, 2023 17:24:47 GMT
I’ve got four.
And two basses.
And two Ukes.
And two hands 🥲
|
|
|
|
Post by elstoof on Jul 27, 2023 17:26:16 GMT
5 electrics
2 basses
1 nylon electric
1 acoustic
Stil not enough
|
|
|
|
Post by quadfather on Jul 27, 2023 17:33:04 GMT
11 synths
Piano
3 drum machines
8 basses
Acoustic
Electric strat
Ukulele
Harp
Sax
Djembe
Tablas
Flute
Trombone
Tongue drum
Still got my eye on stuff
It's a curse but a good one though.
I got rid of one bass once. Worst thing I ever did.
|
|
|
|
Post by elstoof on Jul 27, 2023 17:35:53 GMT
Getting a bit antsy for my 355, Peach reckon august now
|
|
|
|
Post by mothercruncher on Jul 27, 2023 17:38:49 GMT
11 synths Piano 3 drum machines 8 basses Acoustic Electric strat Ukulele Harp Sax Djembe Tablas Flute Trombone Tongue drum Still got my eye on stuff It's a curse but a good one though. I got rid of one bass once. Worst thing I ever did. Cool, so I’ve a new yardstick to aim for 😎👍 |
|
|
|
Post by quadfather on Jul 27, 2023 17:50:10 GMT
No limits! It's music! Go!
|
|
|
|
Post by elstoof on Jul 27, 2023 17:58:38 GMT
11 synths Piano 3 drum machines 8 basses Acoustic Electric strat Ukulele Harp Sax Djembe Tablas Flute Trombone Tongue drum Pretty sure the last 5 or 6 are just sex stuff |
|
